Introduction: Pirates of the Caribbean K Nex Gun

This is a tutorial on how to make a Pirates of the Caribbean knex gun...Duh

Step 1: Step 1 - the Barrel

pics 1, 2: Put 20 red connectors on 2 grey rods as shown ( 20 aprox stop when you have 8 spaces left.
pic 3 : (unclear soz) hook a 2 grey connector and green rod combo onto the right hand grey rod.  Put a tan connector on so the point is along the grey rod (underneath) and towards the red connectors.
pic 4: fill up the remaining spaces with red connectors. turn unside down and put 3 green rods, from the tan piece towards the 7 red connectors. Put grey connectors ontop of the green.

Step 2: Step 2 - the Handle

Do as you see

Step 3: Step 3 - Connection

Connect the handle to the barrel.
Pic 2: add green and greys to the grey connectors on the handle.

Step 4: Step 4 - Rubberbands, String and Firing

Pic 1: tie string as shown
Pic 2: tie rubber band through top of the grey connector next to the tan. Loop the rubberband over the tan.
Pic 3: Make.
Pic 4: Do
Pic 5, 6: Do
Pic 7, 8: Firing. Fires white rods.  cock the put white connector down barrel.