Introduction: Project DESTRUCTION Part 2
this is the second and longest part of Project DESTRUCTION
Step 1: The Ball Catcher
this is the part that sends the balls to the chain lift part
Step 2: The Base
this is the start of the chain lift thingy.
Step 3: The Tower
This is the main tower and the last step before Attaching.
Step 4: Attaching
Attach everything together.
Step 5: Join Part 1 to Part 2
www.instructables.com/id/Project-Destruction-part-1/this is the part where you join part 1 to part 2 if you havent built part 1 yet the link to it is above.
6 Comments
12 years ago on Step 1
you need to get a lift and increase the tower by at least 30 inches and if you got enough k'nex resting make a second tower with a nice spiral
greetings: kululknex
p.s. friends call me btk or btkiller
13 years ago on Introduction
this is exactly the same a the bottom part of the big ball factory...
Reply 13 years ago on Introduction
parts 2 and 3 are the only bits thats the same
Reply 13 years ago on Introduction
no offense but I think you shouldn't do that.
Reply 13 years ago on Introduction
Thats the only one im doing like that, the rest are going to be 100%mine.
Reply 13 years ago on Introduction
i mean as the bottom part