QR Code Puzzles

Introduction: QR Code Puzzles

I was originally inspired by this mikeasaurus's instructable on QR Coasters. However, I don't have a 3D printer (yet :) and don't have that much scrap wood, so I decided on an easier project. This project took me about 10 minutes, with me making it up as I went along. The goal of the puzzle is to assemble it correctly, then scan to find the website or hidden message. (Here's a challenge for you: What platform do I watch the most?)

Step 1: Materials

For this project you will need:

Glue (I used a glue-stick)

Paper (8.5x11)

A piece of cardboard

Tools:

Printer

Scissors (To cut the cardboard)

Step 2: Making the QR Code

The website I used to generate the QR code is here: LINK.

After you generate the QR code, copy the image onto a document, and print out that document. Take your piece of paper with the QR Code and glue it onto the cardboard, cutting of the excess.

Step 3: Making It a Puzzle

I cut my QR code into nine pieces (3x3), after labeling them on the back. You can do any number of pieces, but I wouldn't do pieces smaller then one square inch. Thank you reading my short instructable, and please comment below if you liked it, and vote for it in the Epilog IX Challenge, and the Paper Challenge. Thank you.

-Build-Bot

Epilog Challenge 9

Participated in the
Epilog Challenge 9

Paper Contest 2018

Participated in the
Paper Contest 2018

Be the First to Share

    Recommendations

    • The 1000th Contest

      The 1000th Contest
    • Battery Powered Contest

      Battery Powered Contest
    • Hand Tools Only Challenge

      Hand Tools Only Challenge

    Discussions