Introduction: ROB ZOMBIE!!!!

About: I'm Mario Caicedo Langer (M.C. for short), a Colombian STEAM educator living in Azerbaijan, BSc in Naval Sciences, Master in Toy Design, and former Navy officer. I am a CAD and 3D Printing enthusiast and an ar…

(ANNOUNCEMENT: Answering the public concern about the Atari joysticks, I declare the controls were damaged, broken and without any possible reparation, so I gift them a second life. So relax everyone! No living Atari joystick was killed in the process.)


Ready for another plastic junk idea? IT'S ROB ZOMBIE'S TIME!!!!

We will transform an old diskettes box, an older Atari Joystick and other plastic stuff into an ugly creepy zombie-style decorative figure. Its horrified eyes glow with yellow light, and its heart changes of light color, as heartbeats... And it's easy to build!! And if you get enough stuff, you can build your Rob Zombie Army!!! MUAHAHAHAHAHAHAHA!!!

Well, as the Great Tallahassee says: "Time to nut up, or shut up!", and lets enjoy this little thing!!!

Step 1: Rob Zombie-land Rules...

Do you remember Zombieland Rules? Well, it's time to remember M.C. Langer building rules:

1. If you don't have it, replace it!
2. Use protective equipment (dust mask)
3. Beware of drilled and soldered hot surfaces
4. Work in a good ventilated area.
5. Always have junk in stock
6. Enjoy!


MATERIALS:

2 Oven knobs
4 small iron angles
1 Atari 2600 joystick
1 Diskettes box
2 car lighter plugs
1 plastic piece for the neck (see the instructable picture)
1 small spring
2 roll-on deodorant balls
2 roll-on deodorant caps
1 parfum plastic ball (or anithing roundshape for the heart)
2 big yellow LEDs (for the eyes)
1 big changeable color LED (for the chest)
3 resistors 220 ohm (red red brown gold)
1 switch
1 AA Battery box
2 AA Batteries
1 small plastic case (for the back)
Wire (red and black)
screws and nuts
tin soldering

TOOLS
soldering iron
tweezers
screwdivers
scalpel
pliers
Dremel Rotary Tool

Step 2: The Electronics...

It's like the Valentine's Robogrinch circuit, but with one more LED.

Step 3: The Head...


Step 4: The Body...


Step 5: Finished!!

CHIIIIIIPZZ.... CHIIIIIIIIIIIIIPZZZZ!!!!!!