Introduction: RRRGv1.1

About: Dude why do you look at my page?

 I'm a little bored now so i decided to post The RRRG now Enjoy!......
-Easy to build
-good range fort a pistol
-takes about 5 mins if ur used to it.
-ot really muck pieces
-(I think) Great design
-uses one modified piece if you want to shoot green rods
-Nothing new
(Gunlooks a bit diffirent then in this Picture, this is v1)
-No mag.

Step 1: Handle and Trigger.

Very easy.............
1.Make this.
2.Make this 2.
3. Other Angle.
4-5.Put together.

Step 2: Barrel

Make this 2
1-10. The main barrel with diffirent angles. (bcz i know this is the hardest part)
11. Maker this.
12.Make this 2.
13-17.Attach like shown at the PIc's!
18-21. Attach this too (Nothing keeps it inplace)
Gratz yo made the hardest part!!!

Step 3: Making the Gun!!!

 1.The 2 parts you should have!
2.Put the 2 green rods and the 2 white rods of the handle already to the barrel (this is easier)
3.Between the 2 blue spacers and the triggers there's a hole put the trigger int oit.
4.Almost done!
5.Put a rubber band onto the trigger and onto the barrel.
6.Make a ramrod (the red sh.t is tape)
7.Put it into the barrel.( between the tan clips)
8.Put bigger rubber bands on the ramrod and onto the barrel.
Gratz you made the  gun.
If you know how to shoot it skip the next part!!!
Don't forget to rate!

Step 4: How to Fire.

 It's easy to fire :p
(duhh basic ramrod gun)
1.Pull back the ramrod until it clicks and doesn't shoot back.
2-3.Load any kind of rod into the front of the barrel.
4.Pull back the yellow connector (the one with the rubber band) to shoot!
5.A part of the ramrod will stick out of the barrel.
6.Do the same to shoot again.