Introduction: School Tool Table Organizer 3
I am a 4th grade teacher. A team of my students designed and built this table organizer for our school tools!
Step 1:
- Drill holes in 2 corners of all your disks.
- First lay 4 disks flat on the table with ends touching.
- Attach together with zip ties.
Step 2:
- Then put a floppy disk up in the air and ask somebody to hold it.
- Then zip tie it into the base on the side as shown in the picture.
Step 3:
- Continue to connect the disks together around the base as shown in the picture.
Step 4:
- Attach 3 disk dividers in between the walls where the disks line up.
- Good luck!
- Good Bye!