Introduction: Seated Figurine
I made a wire armature from standard wire & clad it in modelling clay and sculpted it into a figurine. I first made a balsa wood bench with polymer clay feet to determine the exact size I wanted the sculpture to be. It was meant to be a collectors piece for a bar and used the original Jack Daniel photographs of him as reference. I also used a small JD bottle for scale although the bottle was never meant to be in scale with the model itself it did compliment each other in the end.
This sculpture could suffice for any brand of liquor - JD was just the inspiration.
After many hours and frustrating rebuilds I finally got it to a final product. I never anticipated to house it on a platform such as instructables else I would have recorded the steps - It was mainly trial and error process and the end product is arbitrary to the artists' choice.
Once completed I attempted and succeeded in casting a mold from silicone and cast the first prototype - i n the process the clay sculpture got destroyed (Hint:- ensure the original clay is perfect before casting - you wont get a second chance without having to rebuild the original.).
The last photo with the matchbox gives an indication of scale.
Step 1: Cast Final Resin Figurine
I re-sanded and fingerpainted the resin copy of the figurine to simulate bronze / copper and it came out really well - I was happy..
Participated in the
Clay Contest 2016