Introduction: Shoes Organizer
3d printed shoe organizer Single print and Without support.
Step 1: Step 2-Printer Settings
1.Layer Height-0.15
2.Infill-20%
3.Support-off
4.Adhesion-Opptional
Step 2: Overview
Step 3: See It Printing
![Declutter Speed Challenge](https://content.instructables.com/F1D/80E8/K9N91ZSK/F1D80E8K9N91ZSK.jpg?auto=webp&frame=1&width=320)
Participated in the
Declutter Speed Challenge