Introduction: Shotgun Turret for the TR8! (BUILD)

About: Never give up on a dream just because of the time it will take to accomplish it. The time will pass anyway.

Hi guys, today I will be showing you how to build KILLERK'S Shotgun attachment on the TR8 witch was about a year ago. This replaces the 8 shot turret into 8 shells of pellets (green rods) that shoots 8 green rods at a time ; it shoots a total of 64 green rods in a matter of seconds with a range of 100ft+. This attachment is really good for Indoors because they are really easy to loose outside. Let's build! All credits goes to Killerk. VIDEO | KILLERS NEW CHANNEL

Step 1: Remove the Turret

Take off the tan clip attached to the Y connector on the Turret Rod

Step 2: Build the New Turret

32 Y Clips
5 White Connectors
8 Blue Rods
5 Tan Clips
2 Blue Spacers
2 Grey Spacers
32 Size band

Step 3: Place It

Step 4: Shotgun Ammo

25 Grey/purple Connectors

1 Grey rod

1 black hinge

2 grey 2 slot connector

x8 green rods

1 #64 band

Step 5: Lock N Load

You're done!