Introduction: Sturdy Needle for Swiss Army Knife.
I always missed a pin in my pocketknife.
I didn't even know my Victorinox Explorer had a pin room, so i started using a sewing pin.
But i needed something sturdier.
So i took a pet flea comb an extracted one teeth of it.
Step 2: Preparing the Knife
Then i had to prepare the scale to receive the new pin.
Step 3: Finishing the Pin
I'd to cut a little piece of the pin to make it shorter.
As the slot was a little tight i heated the pin and widened the slot.
Then i made a head for the pin with Instamorph. Maybe i'll change the color one day.