Introduction: Tools_Wall_Mount
Hey all
Since i moved from my parents house to a house of my own , i wanted to create myself a convenient area to work on my projects.
So , i got my self a spare room , turned it into a work room including a PC , 2 screens, stereo speakers , and of course a Tools Stand with a table.
I hope you enjoy this project , i know i did ;)
Step 1:
Step 2: Locate the Place
Find you place you want to place the table and the tools
i found my self a nice niche between a wall and a closet.
Got my self a nice 5 cm wood table , mounted it with dark legs and placed it inside
Step 3: Start With the Attaching the Panels to the Walls
i went to a Woodshed to buy my self a nice pine plate ( each 1.2cm thick )
i installed it on the walls with a spacer between the plates and the wall ( the spacer thickness is about 1.5 cm ) - That way you can drill screws to the plate without having to worry about damaging the internal wall.
Step 4: Bracket Frame for LED
You must have an LED light for the tools stand to be awesome !
So i created a small bracket for the LED . You need to saw 3 pieces of pine wood logs , and attached them to the frame with screws
Step 5: Start Mounting the Tools #1
I started mounting the tools on the board using screws.
Started drilling each screw gently so i would not crack the board.
Step 6: Start Mounting the Tools #2
Continue
Step 7: Create a Power Outlet Strip
I did not had any power outlet near by , so i had to run a 10m cable ...
\
Drilled the table at it`s end , and ran the cable threw it
Step 8: Attache the Table to the Wall
I had to attache the table to the wall in order for it to be steady.
Since i would work on it a lot , and i would drill , saw , and use a hammer , the table must stay still
Step 9: Beer Brake
Must have a cold one
:)
Step 10: Add an IPad
You must have an iPad
And if you already have one , use it to watch instructional videos, YouTube music , and of course the Instructables site
:)
Step 11: Create Some Unique Sign
I wanted the area to be neat coo; ,so i bought a sofa from Ikea ,and a few extra shelves
Moreover i connected my working station + 2 screens. and all came out perfect
I decided to print a bunch of letters with a the next Quote " Design Create Inspire " , you need to cut each letter separately , and glue them on the wall ( it took forever ! )
The result is great !
Step 12: All Done!
Let me know what you think of
It was hard work , and took a few days of mounting and designing the whole concept
But i`m very happy with the result , finally i have a room @ my home , which i can express my thoughts and enjoy building them
Hope you enjoy this instructable , cause i know i did
:)