Introduction: Wine Bottle Hanger

This is not a new thing, there are "hangers" like these on shops, and that is why I made this Instructable, I was looking for a way to store some bottles of wine and in a shop I came across with one metal tube with holes along it, so you can hang bottles by the bottleneck, it wold cost me 25€... Well thats simple, I can do it with wood i thought...

Step 1: Find the Material

I had some pieces of wood stored that were leftovers from the floor, it's a very hard wood caled "Jatobá", but you can use any kind of wood or any other material that can stand the weight of the bottles.
You have to measure the thickness of the bottleneck so you can choose the right ring for the drilling tool (I dont know what is the correct name of the tool in english)
The measures I used where 3cm for the holes and 10cm between them

Step 2: Drill the Holes and Sandpaper It

This wood is very hard so when i was drilling it started to burn, making smoke and smell. 
But its a simple thing to do, dont forget to clear the other side, so you wont end up with a driled table :D
After the holes were done, cut it to size and sandpaper it to give it a good look

Step 3: Wall Spacer

Well, I was thinking in a way to hang it on a wall... and i took a look in the roud pieces of wood that were left from the holes, and there was the answer.

Step 4: Finishing

And at last screw it on a wall, before that I gave it a varnish coat for a well finished look.

I hang it under the water heater, saving more space on the counter.

feel free to say something