Bob's Perfet Side-arm

Introduction: Bob's Perfet Side-arm

ive been longin for the pefect knex guns and i thought i could make a pretty good side arm.
it is based on TheDunkis' TDS2 (so it would only be fair to give him some of the credit) but it has alot of mods. this is my first instructable so don't be too harsh :) please comment and post your mods.

Step 1: Body/ Barrel

I haven't made this too detailed because i think it's simple enough.
1. top
2. back
3. middle
4.end
5. under middle
6. under end

Step 2: Magazine

Mag...
1. the mag
2. left side
3. left lower
4. ammo

Step 3: Trigger

This is the trigger used in the TDS2 (credit goes to TheDunkis and any1 elso who made it- i thinks he was the first... ask him if u must)

1. trigger
2. trigger
3. take off the brown tanclip wen u put it on

Step 4: Funky Bits.

all the little decorations and stuff.
i dont think they need much detail, simple enough.

1. handle
2. front bit
3. sight

Step 5: Put Is All Together

This doesn't really need a slide but i may as well.

1. ammo to barrel
2. -connected
3. sight to barrel
4. -connected
5. thing at the front.
6. handles
7. -conected
8. mag pusher
9. -inside.
10. trigger.
11. tigger

Step 6: Rubber Bands

it doesn't really matter where you put the bands but here are a few pics anyway

1. mag pusher
2. up here (btw it doesn have to go behand the grip/ handle if its ontop it holds it on better)
3. over this bit
4. use to bands on the ram.
5. here
6. trigger.


ive spent a pretty long time on this so plz tell me if it any good and if i should post more guns n stuff.

Be the First to Share

    Recommendations

    • Exercise Speed Challenge

      Exercise Speed Challenge
    • Pocket-Sized Speed Challenge

      Pocket-Sized Speed Challenge
    • Audio Challenge 2020

      Audio Challenge 2020

    28 Discussions

    0
    TheDunkis
    TheDunkis

    Reply 11 years ago on Introduction

    Not perfect yes but I didn't know the point of pistols was to be bigger than needed...I thought that was the sniper's job.

    0
    yerjoking
    yerjoking

    Reply 11 years ago on Introduction

    Mine too, I have to extend your storm guns' handles 'cause they're tiny lol.

    0
    bobthebuilder246
    bobthebuilder246

    Reply 11 years ago on Introduction

    yh i dont have the patients to design anything bigger :s i think its good 4 wot it is tho mine is quite acurate and powerfull.

    0
    xadevox
    xadevox

    11 years ago on Introduction

    killerk's magnum is pretty much prone to ram snaps!

    0
    knex_mepalm
    knex_mepalm

    11 years ago on Introduction

    I am going to post a way of making a gun prone to ram snaps

    0
    bobthebuilder246
    bobthebuilder246

    Reply 11 years ago on Introduction

    ??? im just sayin u need to tape it cos i took mine apart and wen i put it back to take the pics i had no tape...

    0
    knex_mepalm
    knex_mepalm

    Reply 11 years ago on Introduction

    dude where you pull back the cock put a pink connector thingy and it will stop the things, it works for me and it works on any guns. It don't decrease power and prevents snaps and also can be doubled as a safety

    wow i havent looked at this gun since i made it in like last september and now i reckon it looks well crap lol (it seemed quite cool when i first made it) ...oh well at least it worked :p ...

    0
    Miles Tails Prower
    Miles Tails Prower

    Reply 11 years ago on Introduction

    OH SORRY!!! I confused you with DJ radio. Sorry Jamalam... But I do have sidearms, 2 of 'em.