Introduction: ☺DIY 2wd Rover ☻
Hello and welcome to my another instructable about technology . This complete guide will show you how to make a 2wd rover.It is very light weight and cheap . The things needed can be found at home you do not need to order them .
If you like my instructable , then please vote me in the contest and do not forget to follow me ☻☺
Teachers! Did you use this instructable in your classroom?
Add a Teacher Note to share how you incorporated it into your lesson.
Step 1: Stuff You Will Need
1:1x gear box with a stepper motor on it . (i found this in my tape recorder ☺)
2:1x 4v rechargeable lead acid battery with a usb cable.
3:two pieces of plastic.
4:1x usb female plug.
4:Scissor ,Tape ,Switch☺☻☺☻☺☻
join the two pieces of plastic with tape or any other adhesive you like ♥
tape the pieces of plastic to the gearbox ☺
wire up all the stuff as shown in the wiring diagram ☺☻
Put all the stuff on it and you are ready. please vote me in the contest.there is a video of it in action.
Participated in the
Epilog Contest VII