Create your own Christmas angel to place on top of the Christmas tree using reclaimed materials and Makedo re-pins and re-clips available at mymakedo.com

Step 1: Find

Source 2 different sized coffee cups and a coffee cup lid, a bottle cap and left over gift wrapping paper.

Step 2: Punch

Use the point end of the Makedo safe-saw and punch a hole on the top of the larger coffee cup. Also punch on the side of the samller cup.

Step 3: Connect

Connect the smaller cup on its side to the top of the larger coffee cup using a Makedo pin and clip.

Step 4: Punch

Punch a hole on the center of the bottle cap using the Makedo safe-saw. Insert a Makedo pin in the hole.

Step 5: Connect

Punch a hole on the top of the smaller coffee cup. Position the bottle cap and pin above the cup and Makedo clip it into place.

Step 6: Build

Pleat fold the gift wrap and layer on top of one another. Punch a hole in the center of the fan fold.

Step 7: Build

Connect to the main body of the angel with a Makedo pin and clip and using a Makedo hinge on a 90 degree angle.

Step 8: Share

Decorate if you wish with reclaimed material such as ribbon. Position the remaining coffee cup lid as the face of the angel and place it on the top o your Christmas tree.Share and upload your creation to mymakedo.com