Programming the Viper 2 Way Remote.

About: Update 12 September 2017: A very special thanks to Sam Elder, a manager here at Instructables, who tracked down the cause of my lost publications and fixed the issue. Take a bow Sam!

Intro: Programming the Viper 2 Way Remote.

For those of us with viper 2 way remotes, here is how to program certain features on it.

Step 1: The Program Button.

On the back is a p button. Just press and hold for 2 seconds. It will long beep and enter programming mode.

Pressing for 2 seconds or ignoring it for 20 seconds will cause it to exit programming mode.

Step 2: Putting Into Vibrate Mode.

Pressing the arm button will enter or exit vibrate mode. This is useful for turning off those annoying confirmation noises.

Step 3: Backlighting.

The disarm button toggles the backlight. Quite handy for use in the dark!

Share

    Recommendations

    • Furniture Contest 2018

      Furniture Contest 2018
    • Optics Contest

      Optics Contest
    • Electronics Tips & Tricks Challenge

      Electronics Tips & Tricks Challenge

    Discussions