Repair Old Speedometer broken cover
This old speedometer have transparente cover broken and lost needle
Step 1: Making a New Needle
1. cut a small wire and heat it until melt the plastic on center
2. paint it with final color
Step 2: Drawing New Pasts
measure it and draw new cad models
Step 3: Making New Parts
start doing new parts
1. the ring is printed in 3d print machine
2. tranparente shape cutted from acrylic sheet on the laser cutting machine
Step 4: Final Assembly
After paint parts assembly with glue.
Now are protected with new cover!
I hope that you like it.