Introduction: Introduction
Hi we are Prashanth.N, Shivaraj and Cheluvaraj. We are from Kaggalipura Project DEFY nook, recently we had attend the robot making workshop in our nook, it was very interesting we enjoyed a lot.we are studying in 8th class. Today we are going to show how to make a toy robot at very low cost.
Materials required:
- cardboard
- Foam
- scissor
- solution tape
- glue gun
- marker pen
- 2 sticks
- straw
Step 1: Remove the Surface
Take any rectangular shape cardboard box now remove the one biggest sarface of that box with the help of scissor which is as shown in tha image
Step 2: Cut the Foam Circular Shape
Now make a mark which is approximately 10 cm away from any edge and make a hole on both circles which is exactly center on one and on other circle 10 to 15 cm away from the peripheral.
Step 3: Cuting of Foam in Round Shape
Now take a foam and make a circle with the dia of 30 mm each and now cut it with the help of scissor now put tha hole exactly at tha senter on one circle and for onther circle put tha hole 15mm away form the phiriferal of any side of the circle and cut a smallpease of foam as shoawn in tha image
Step 4: Dall Makeing
draw any dall shape are any onther shape which you want on the cardboard and cutit with the help of scissor.
Step 5: Assemble
Put the straw on the top then in insert the dall as shown in the image.