->This is an re-used material cap..Wearing on head during take bath to avoid head wetting...
->this cap was used to wear on head during take bath who doesn't want to head wetting...
->To do made this I take only 45 mins of time....
-->THIS CAP WAS MADE UP OF FULLY TRASH MATERIAL AND USED BY ME...
->If plastic was tearing or rubber band was demaged on this during using throw away the product and made new one was easy to produce because of less time need to make it...
->cap will come life of one month until

Step 1: Material Used

---> waiting to throw away carry bag
---> rubber band
---> iron stick and any medium to heat that iron stick ( I use mini kerosenelamp).

Step 2: COLLECTING MATERIALS

@@ First select the required thickness plastic bags (I used medium thickness) to get desired shape of cap...
@@ use medium elasticity of rubber band to avoid over grip during wearing cap on head....

<<>>

Step 3: Cut Required Size

>>First of all cut the plastic bag to u r size of head...
>>That being cut piece we need only that closed side of the plastic bag...

Step 4: PLANNING

then plan that make sure you had rubber band was upwards to the closed side of the plastic bag..(shown in fig)

Step 5: Heating

>>Yet the rubber band was up side of the plastic bag and fold the edges of that slictly then heat the iron stick and join the folded edges by using the heated iron stick.....
>>To do this may be 30 mins only require....

Step 6: FINISH OFF

Still we get required shape of the cap and flip inside out... This will to hide the heating joints on the plastic bag...

Step 7: USING THE CAP

I use that cap after finish off the work..... It would be pretty during take bath and won't want to head wetting....

Step 8: OLD ONE

>>This was old one made by me before one month and still the rubber band inside the cap gets losing its elastic strength I made the new one last day..
THAT'S I UPLOADED IN INSTRUCTIBLES.....