Star Shaped Ribbons

27,831

136

16

Intro: Star Shaped Ribbons

Wanna learn How To Make professional looking star-shaped ribbons?

Watch the video or follow that Instructable

Step 1: You Need..

- ribbon roll(s)
- 4 pins
- a stapler

Step 2: Cut 12" of Ribbon

start cutting about 12" of ribbon

Step 3: Fix Pins and Ribbon

Dispose 3 pins as a triangle, then fix the ribbon using the 4th pin as shown. Remember to leave out 2-3" of ribbon.

Step 4: Spool the Ribbon Around the Pins

Spool the ribbon around the pins.
Every pin must be wrapped 3 times.

Following the Image Notes, the order of wrapping is: 1-2-3-1-2-3-1-2-3.

For a clarification of this step you can watch the video:

Step 5: Take Out the Ribbon

Take the outher pin and pierce the center.

remove the 3 pins, and take out the ribbon keeping the central pin.

Step 6: Pull Apart the Layers

pull apart the 3 layers of the angles, then rotate a bit the layers around the pin.

You can check this step in the video.

Step 7: Roll and Pierce the End of the Ribbon...DONE!

Roll and pierce the end of the ribbon (you can cut ribbon in excess at this time), then fix it using the stapler.

Remove the pin and.. BINGO! the ribbon is done =)

check the video for clarification about the steps:


Remember: you can make ribbons of every size and color just changing the ribbon roll.

I hope you enjoyed this instructable!
Happy Holidays from BlindSight (How2Make.It)

Share

    Recommendations

    • Halloween Contest 2018

      Halloween Contest 2018
    • Plastics Contest

      Plastics Contest
    • Side Dishes Challenge

      Side Dishes Challenge

    16 Discussions

    0
    None
    laaha

    6 years ago on Introduction

    as great as this instructable is, why in the world would you make these when you can buy them for 10cent a piece in every store?

    2 replies
    0
    None
    Doganielaaha

    Reply 6 years ago on Introduction

    This way, you can make them any size you want and out of any kind of ribbon you want.

    0
    None
    laahaDoganie

    Reply 6 years ago on Introduction

    you're right, I haven't thought of that! I'm gonna make a gigantic one in all the colors of the rainbow! :D

    0
    None
    Kryptonite

    8 years ago on Introduction

    Great Instructable, wonderful video and crystal clear instructions. Deffinitely going to be used for my Christmas presents!

    0
    None
    prynk_ray

    9 years ago on Step 7

    thanx for the tips... it was really a nice one

    i loved the step by step well demonstrated instructions. Excellent ! keep it up.

    0
    None
    nanayinya

    10 years ago on Introduction

    thank you for posting this. very helpful and clear instructions.

    0
    None
    ladiesman247

    10 years ago on Introduction

    im a 12 yr. old kid. and im an art guy. creative. and SWEET!!! LOVED IT!!! GREAT JOB!!!!!!!!!!!!