here is my newest project
this is a gun based of the the "the not retancle'' from KI
i used the disign and the wonderfully trigger from zak WATCH THE VID ON YOUTUBE
this gun used a new concept that prefents the ram from breaking
the ram don't break because it does not stop by the end but by the begin of the ram
so you can put as many rubberbands as you want on it
it shoots 2 shots at one
the trigger is disigned by zak and can have a lot of power

some stats:
-shoots about 30 feet with a white rod
-shoots about 50 feet with a oodammo
-shoots about 100 feet with a sniper round
-two shots at one
-great ram guide
-high rof
-comfy handle
-good sight (not that great)
-great trigger
-strong body
-ammo lock

I GIVE FULL CREDITS TO THE MIGHTY ZAK

please rate this gun on his performes and not on his looks
PLEASE RATE AND SUBSCRIBE

so let's get build it

first the part list

rods:

green rod: 173
white rod: 55
bleu rod: 27
yellow rod: 1
red rod: 1
gray: 2 or 0 if you use black rods
black rod: 2 or 4 if you want a strong ram guide (required)
broken white: 1 (sorry)
-------------------------------------------------------------------------------------------------------------------------------------
connectors

tan con: 4
gray con: 39
light gray con: 3
orange con: 22
red con: 21
green con: 11
yellow con: 87
bleu con: 4
white con: 0
-------------------------------------------------------------------------------------------------------------------------------------
misc:

y con: 12
ball socket: 9
ball joint: 1
metallic con: 2
small wheels bands: 2
small rubberband: 2
big rubberband: 1

note: 2 tan cons by the trigger ar metallics

Step 1: The Front Bit

let's get started with the front and handle+trigger

Step 2: The Stock

just making the stock

Step 3: The Ram + Ram Guide

last step of making the gun
not that hard to make right?

Step 4: Rubberbands and Another Stuf

add rubberbands and wheelsbands and gray connectors

Step 5: Some Mods

here a some mods
the ram mod can not be made by every man so....

Be the First to Share

Recommendations

World's Fastest Can Opener by sirjason132 in Kitchen

2 850

Cryptex - 10 Steps for 110 Possibles Designs by Tony Vanpoucke in Toys & Games

170 12K

3D Printed Futuristic Space Age Wall Clock by kura_kura in 3D Printing

58 4.1K

Easy DIY James Webb Telescope Mirror. by backwards lamb in Decorating

1 155 12K

Game Design: Student Design Challenge
Make It Bridge
For the Home Contest

49 Comments

Agony

11 years ago on Introduction

where is the orange connectors on the parts llist when u use them in the gun

tom tom go

12 years ago on Introduction

I like this gun but i dont like the dubbel firing pin. Could you please make one with just 1 barrel?

MotaBoi

12 years ago on Introduction

In the beginning write "This is my version of the NAR" or "This is a NAR". It would really clear up some confusion, and if people knew what this gun really was it would be a lot bigger and more popular.

chopstx

13 years ago on Introduction

This isn't a pistol.

Introduction: Knex Carbine Rifle