Alexandros Mandilaras

Thank you!

Thank you very much!

Wow, that is amazing! Thanks for sharing

Hello, i have updated the code, you can download the new code file from step 3, it should be functional now.

Hello, by reference you mean the wiring of the reed switch? If so you have to look at the symbols on the pins, i assume it's different for different makes. For example the reed i used has three pins and as seen on the picture, the right is connected to the ground (- symbol), the left pin is the signal (S) and the one left, the pin in the middle is the positive power supply. I hope my answer was helpful, if not just ask again.

Thanks for your tip. I'm going to try it and post the results.

It's nice :)

You're right, that is more practical and easy. The second "generation" of my knobs are made this way.

Thank you! Good and inspiring question; The flower is actually airtight in the resin enclosed and i hope that the screw is going to seal the drilled opening at the back side. I am absolutely going to try making a knob with an opening to intentionally expose the flower to the air. It would be nice to see how the view of the knob changes with the drying procedure, but it is possible that the flower rots; it's definatelly worth trying, thanks for giving me the idea!

Thank you very much!

Thank you! The dandelion was fresh cut and the egg shell was carefully filled drop by drop with epoxy resin at the center of the stem in order to keep the beautiful structure of the flower intact.

Thank you!

Thank you very much. I hope thaht you will have fun making this for project!

Very nice and creative project!

Thank you very much! I personally find the beacon of Aachen amazing and i am definitely not Aachen biased...