
BMsculptures's instructables
Achievements
- BMsculptures's instructable Carving a Swan From Epoxy and Buckeye Burl 's weekly stats:
- BMsculptures commented on BMsculptures's instructable Carving a Swan From Epoxy and Buckeye Burl
Thank you!
Thank you! Sanding was quite tedious on this piece.
View Instructable »Thank you so much!
- BMsculptures's instructable Carving a Bear of Out Epoxy and Wood 's weekly stats:
- BMsculptures commented on BMsculptures's instructable Carving a Bear of Out Epoxy and Wood
- BMsculptures commented on BMsculptures's instructable Carving a Bear of Out Epoxy and WoodView Instructable »
haha I get fatigued of river tables as well. I knew I had to switch it up! Thanks for the support!
- BMsculptures commented on BMsculptures's instructable Carving a Bear of Out Epoxy and WoodView Instructable »
Thank you Penolopy! I hope to do some more like this in the future!
- BMsculptures's instructable Rustic/Industrial Log Table 's weekly stats:
- BMsculptures commented on BMsculptures's instructable Rustic/Industrial Log Table
Unfortunately I don't know of any. I ran into the same problem when I started a couple years. I wanted to take a class so bad to learn but there were none in my area. I just went on youtube and did hours upon hours of research and eventually got better and better after practicing. Maybe you will have a class nearby, if not, youtube is great!
View Instructable »Thanks! I used 3 coats of fabulon sanding in between coats. I also used it on the bark. Ive tried quite a few wood finishes, and by far fabulon has been the most heavy duty-durable. I went with this so I could try and seal the bark on there as strongly as possible.
- BMsculptures's instructable String Pendant Lights (as Seen on "Making It")'s weekly stats:
- BMsculptures commented on BMsculptures's instructable String Pendant Lights (as Seen on "Making It")
I actually bought some big bulb outdoor LEDs after the fact. I scrambled to find bulbs I had laying around the house for this. The new ones look much better too!
That would be cool! let me know how it goes!
That sounds amazing! I will have to try that for my daughter next year
View Instructable »I don't see why not!
- BMsculptures's entry How I Made This Shop Chair Using Chain and Scrapwood is a winner in the Furniture Contest contest
- BMsculptures's entry How I Made This Shop Chair Using Chain and Scrapwood is a finalist in the Furniture Contest contest
- BMsculptures commented on BMsculptures's instructable Japanese Barstool With Tusk and Tenon Joint
- BMsculptures's instructable Super Sucker Downdraft Table. Dust Free Sanding and No More Messy Cleanup. 's weekly stats:
- BMsculptures commented on BMsculptures's instructable Super Sucker Downdraft Table. Dust Free Sanding and No More Messy Cleanup.
Thank you!
Thanks. Interesting, that sounds really cool.
That would have been way to smart! Instead I like spending much more time on these things.
View Instructable »Check the air filter. Majorty of vacuums that are loosing suction is due to the air filter being clogged.
- BMsculptures's instructable Wooden Gate and Fence With Concrete Post's weekly stats:
- BMsculptures commented on BMsculptures's instructable Wooden Gate and Fence With Concrete Post
I didn't realize the brace was the wrong direction until I installed it. whoops!
I know. I may change it. I didn't realize it was the wrong direction until it was already installed. whoops
View Instructable »That is a good idea. I am not familiar with different climates. I only know what is standard here in Clovis, CA which is always warm and dry.
- BMsculptures commented on BMsculptures's instructable Wooden Gate and Fence With Concrete Post
Yes I forgot to mention that you can pressure wash, or just plain sand the fence boards!
Oh NOO!!! lol that was a typo... I guess I was thinking "shovel" in my head vs the Hammer. Thanks for catching that. I will edit it!
what old shovel handle? The one I restored a couple months back?
View Instructable »hahaha
- BMsculptures commented on BMsculptures's instructable Wooden Gate and Fence With Concrete PostView Instructable »
haha Thank you brother! I like how you did yours with the double cross bracing... Makes me want to go back outside and add another brace!
- BMsculptures's instructable Melting Crayons and Carving Them Into a Sculpture's weekly stats:
- BMsculptures commented on BMsculptures's instructable Melting Crayons and Carving Them Into a Sculpture
Thanks for the tip!
Thank you!!!
That would be fun!
View Instructable »Very good to know! I will do this next time for sure!
- BMsculptures commented on BMsculptures's instructable Melting Crayons and Carving Them Into a SculptureView Instructable »
It was really fun! I have ideas to make the next one much better though
- BMsculptures commented on BMsculptures's instructable Japanese Barstool With Tusk and Tenon JointView Instructable »
Thank you! I think i will in the future!
- BMsculptures's instructable Japanese Barstool With Tusk and Tenon Joint's weekly stats:
- BMsculptures commented on BMsculptures's instructable Japanese Barstool With Tusk and Tenon Joint
It is 24" tall x 20" wide x 8" deep
Thank you! I actually thought about it quite a bit, and there are already a ton of instructables and videos on this same tapering jig so I don't think I will end up doing one. Do a quick search on DIY tapering jig and you can find really good plans for this exact one!
View Instructable »haha thank you!
- BMsculptures's instructable Turning a Old WRENCH Into a SWORD's weekly stats:
- BMsculptures commented on BMsculptures's instructable Japanese Barstool With Tusk and Tenon JointView Instructable »
Im almost certain that most people that have zero mistakes just edited their mistakes out lol. I also learn everything from watching other people work, it is the best way to learn! Thanks for watching!
- BMsculptures commented on BMsculptures's instructable Japanese Barstool With Tusk and Tenon Joint
Thank you Mark... I never heard of it either before starting this build haha. Once I researched it I learned that the Japanese barstool and Contemplation stool are one in the same basically.
haha I have really strayed away from my sculptural background I suppose. Thats amazing that you have some old walnut you can work with from the farm. That would be really cool and sentimental to make a couple of stools from it!
View Instructable »haha well Thank you.... A little luck a little craftsmanship I suppose
- BMsculptures commented on BMsculptures's instructable Turning a Old WRENCH Into a SWORDView Instructable »
I didn't keep track but I'd say around 10 hours total or so? More hours editing the video than actually making it haha.
- BMsculptures commented on BMsculptures's instructable Turning a Old WRENCH Into a SWORDView Instructable »
Thank you for watching and checking out the instructable. I appreciate it!
- BMsculptures commented on BMsculptures's instructable How I Made This Shop Chair Using Chain and ScrapwoodView Instructable »
hm I cant seem to see the photo?
- BMsculptures commented on BMsculptures's instructable How I Made This Shop Chair Using Chain and ScrapwoodView Instructable »
Thank you Phil. I would love to see the wine bottle you made! I think I got extremely lucky to find ungalvanized chain. None of the big box stores had any, but surprisingly my local tractor supply store had some. Thank you for viewing my intractable!
- BMsculptures commented on BMsculptures's instructable How I Made This Shop Chair Using Chain and Scrapwood
Thank you!
Thank you so much!
Thank you!
View Instructable »Each link is roughly 1" or so. I am not sure about the thickness or gauge.
- BMsculptures commented on BMsculptures's instructable How I Made This Shop Chair Using Chain and ScrapwoodView Instructable »
Thank you!
- BMsculptures entered How I Made This Shop Chair Using Chain and Scrapwood in the Furniture Contest contest
- BMsculptures commented on BMsculptures's instructable How I Made This Shop Chair Using Chain and ScrapwoodView Instructable »
Thank you! I did not know that was going on... I definitely will!
- BMsculptures commented on BMsculptures's instructable Easy DIY Paint Can Shaker. Never Shake Spray Paint Again!!!View Instructable »
Thank you Jessy!
- Show More Activities