The models were made in Siemens NX. The original files are in the zip file from step 2 (.prt files). If you want to 3d print the files you will probably need these stl files though. Good luck!
Hi Eva! I have had this problem. By experimenting with the 'skirt' hight (it's important that you leave a gap between the wall and this skirt) you can find an ideal configuration. Note that the robot is pushing itself to the wall, the created vacuum only partly helps the robot to climb the wall.
Hi! I made your instructable! But when I put it on, the elektromagnets got really hot and the power consumption was about 2A, (and it didn't work yet) Any idea how this can occur?
What I was looking for
Arduino Air Bonsai Levitation
Unfortunately it's not possible to sell its body. Your sugestions are possible, it would be a nice project.
Because many people asked me for a wiring diagram I have now added one to the instructable, enjoy!
Contact me on facebook, so you can explain me more in detail what you want to know. https://www.facebook.com/rob.cardinaels
This problem is solved ;) enjoy!
THERMOFORMER / VACUUM FORMER / PATTERNMAKER
GECO - Wall climbing robotView Instructable »
ArmrestView Instructable »
Building Your First Android Application
8x8x8 LED Cube with Arduino Mega (+Sound +PS controller +Game)
LED Cube 8x8x8
Repurpose an old wifi router for the internet-of-things
Hack a $30 WiFi Pan-Tilt Camera - Video, Audio, and Motor control with Python
ROV submersible (PVC)
Make a RC boat from old RC car
Building a semi Smart, DIY boat with Arduino and some other sensors
Making an autonomous boat using a Raspberry Pi (WiP)
Altoids USB Condenser Microphone
How to make a projector for your iPod/iPhone for about a $1
Make an iPod Video Projector
Make a cheap 3$ Projector