Dave85's instructables
Tell us about yourself!
Achievements
- Dave85 commented on mayday12's instructable How to Make an Airsoft Mortar
- Dave85's instructable DIY Air Cannon's weekly stats:
54 views0 favorites0 comments
- Dave85 posted an instructable DIY Air Cannon
- Dave85 made the instructable El-cheapo (very) Basic Active Laptop Cooler PadView Instructable »
I grabbed one of the many locker organizers left by students and made one. I bent the angles straight , added 4 bolts with 8 nuts and attached the fan with zip ties.
- Dave85's instructable Heated Dog House (medium Size Dog) 's weekly stats:
- 353 views3 favorites1 comments
- Dave85 posted an instructable Heated Dog House (medium Size Dog)
- Dave85 made the instructable Humane Multi-Mouse Trap Zapper - No Pain Instant DeathView Instructable »
I made a version of yours but with a modification inspired by a YouTuber called “The King of Random.” The rig I made puts out 2kv using a microwave transformer. Thanks for the idea!
- Dave85 commented on Dave85's instructable Brake Disk ForgeView Instructable »
No the CO2 is worse. The zinc is only a coating and burns off within the first couple of burns. The CO2 is given off every time.
- Dave85 commented on Dave85's instructable Brake Disk ForgeView Instructable »
The galvanized steel seems to be a popular topic. No one mentioned that the carbon dioxide as being a deadly toxic gas. The galvanized is a non-issue.
- Dave85 commented on Dave85's instructable Brake Disk ForgeView Instructable »
The galvanized pipe is not a real issue and it has been addressed. Unless standing directly over the forge (impossible) or using it indoors (dumb), it does not pose a threat to health.
- Dave85 commented on krhagerich's instructable Poor Mans Repair Guide For Chevy,GMC Vortec Fuel Injector spider or CSFI SystemView Instructable »
Sounds like my issue so I would say yes. I mentioned all that I had done to my truck to the service guys at the Chevy house and they did their diagnostics to find out. Honestly, you get to a point where it couldn't be anything else. If your model is around the same age and mileage (160k) it's likely that the problem is the Spider injector.
- Dave85 commented on Dave85's instructable Brake Disk Forge
A fan blows the air on a charcoal fire increasing the heat. The bottom is capped to prevent air leaving.
View Instructable »Your issue has already been addressed and mentioned in the instructable.
It's better to use pvc cement without the primer. A link to a study with data is posted below. I use two similar cannons in my classroom to teach optimal angle (45 degrees).