Tide and Weather Clock
Cosmos Mariner: a Large Aperture Dobsonian Telescope
Truck Canopy / Topper
Height-Adjustable Portable Vise Stand
Giant Homemade 16" Disc Sander (for the Lathe)
Scrap Cart From a Single Plywood Sheet (w/ Plans!)
Thank you very much for this. It gave a few specifics that I was unable to find in nearly a dozen other places on the 'net.
Evaluate, Repair and Adjust a Second-Hand Micrometer
Cedar Strip Kayak
Jewelry Box Build by WoodSkills
Walnut Box With Aluminum Splines
Picture Frame With Corner Splines
Make a Simple Spline Jig
Arduino Based Lap Timer
A precoat layer of epoxy would increase the weight, but only minimally. If you are worried about counting grams you can apply the wet carbon directly over the foam but at that level of weight watching, you will also want to be bagging and pulling vacuum on the parts to eliminate any excess epoxy. The foam I used didn't absorb the epoxy to any noticeable extent.
I used an insulation foam board, available at most hardware stores. It comes in large sheets. I used carbon fiber directly on the foam. You could coat the foam in epoxy to make it stiffer before you do the carbon fiber and compression wraps.Y gracias a google translate - he utilizado un panel de espuma de aislamiento, disponible en la mayoría de las ferreterías. Viene en grandes sábanas. Utilicé fibra de carbono directamente sobre la espuma. Usted podría cubrir la espuma en epoxy para hacerlo más tieso antes de que usted haga la fibra del carbón y los abrigos de la compresión.
Laser Tripwire Home Alarm System
Hand Crank Flashlight
Welding Tools and Materials
Beginning to MIG Weld
Welcome to Welding
Attach Zoom Lens to a Smartphone
Make Your Own Li-Ion Battery Pack
12" Disc Sander
Custom Wall Tool Holders
How to Dimension Lumber With Hand Tools
Easier Homemade Bar Clamps
Polycarbonate can be found at most hardware / home improvement stores. You can ask for it by it's more common names of Plexi-Glass or Lexan.
Make simple digital telescope
Laser Sensor Timer
Make It - Moxon Vise
Way to go making your own, but a quick installation note. The way you have your fender mounted will interfere with the suspension fork travel. If you were to mount it to the arch of the lowers on the fork like this, it wouldn't interfere with the suspension action. This is the way the "buy it at the store" versions get installed.
How to Make a Propane Forge
How to Build a Propane Forge Burner
Plywood Hot Wire Foam Cutter
Forged Damascus Chain Knife - Drop Point Hunter
Triple Your Tool Storage Space!
DIY Hot Wire Cutter for Plexiglass, Cardboard and Foam
Build a Raspberry Pi SUPER Weather Station
Cheese Puffs - Gougeres
How to Make Great Fresh Mozzarella Cheese
DIY Spot Welder From Microwave - Now With OLED Display!
International Space Station Tracker/Pointer
DIY Infrared Night Vision Device
2X4 Work Bench
A beginner's guide to Arduino
Building a real woodworker's workbench
Raspberry Pi: Wall Mounted Calendar and Notification Center
Simple Plywood Box...
How to make a doormat out of recycled ROPE!
The making off a toolbox and Adirondack chair out of oak
Functional and Sturdy Wooden Toolbox
Oak Jewelry Box featuring Box Joint Construction
Build a Woodworker's Toolbox
Building my cedar strip canoe
Infinity mirror color changing touch table
PiNoculars - Raspberry Pi Binoculars
Fibonacci Spiral Jigsaw puzzle
DIY Porch Swing (Free Templates!)
How To Make The Mini Metal Foundry
3W 4'x4' Arduino Laser Cutter/Engraver
Making a Vacuum Bag Connector (Vacuum Port) for $10 with Hardware Store Parts
convert a tire inflator-type air compressor into a vacuum pump
Bicycle Frame Building Jig
Making a Stock Removal Chefs Knife