MAYER MAKES

the level of a guitar is never stable , you will always have to adjust gain and dial in your desired sound . In this case it does not matter which channel you choose, I would try both and roll with the one which sounds cleaner.

thanks

that is a standard jigsaw and a jigsaw table, you can attach the jigsaw underneath it and use it as a cheap replacement for a bandsaw ,but it also can be angled to do miter cuts or bevels. keep in mind that this is only a cheap replacement not a prper tool for woodworking, I use it for samall or joggly cuts when I don not want to pull out the proper tool for the job, you can use it as a vertical oscillating sander as well when you glue a piece of sandpaper to an old dull jigsawblade

Hi BiancaThank you for subscribing to my channel, and thank you for your messages. I think you have not read the instructable completely, because it is not about an alternative 3d printer, but about alternatives to 3d printing.The instructable explains how you can easily mock up prototypes etc. without using a 3d printer. The cheap alternative to 3d printing is making it by hand. every step of the instructable I published explains a different method of making physical prototypes by hand. Or you could explain different types of 3d printers the main two variants are FDM (fused deposition modelling--> the one with the plastic strings) and UV-Resin printers. Google for "FDM", "Cartesian 3d...

Hi BiancaThank you for subscribing to my channel, and thank you for your messages. I think you have not read the instructable completely, because it is not about an alternative 3d printer, but about alternatives to 3d printing.The instructable explains how you can easily mock up prototypes etc. without using a 3d printer. The cheap alternative to 3d printing is making it by hand. every step of the instructable I published explains a different method of making physical prototypes by hand. Or you could explain different types of 3d printers the main two variants are FDM (fused deposition modelling--> the one with the plastic strings) and UV-Resin printers. Google for "FDM", "Cartesian 3d Printer", "UV-Resin" , "Reprap", "Kossel Rostock" to get more information on the different types.I f you want to do your school project about 3d printing you could demonstrate these techniques in class to show that you don't need an expensive 3d printer to be a maker. The most software for 3D printing is in fact free to download (mostly for Linux Operating system) but the machine itself is not cheap. Nowadays its cheaper to buy a working 3dPrinter or a kit than making it yourself. Hope I helped you a little bit.Keep on makingBest regardsClemens Mayermayermakes.de.tl www.facebook.com/mayermakes