MagicManu

Except for the video, all the instructions are already in English.

Thanks, and good research!

It's a Bosch GKT 55 GCE Professional, it can plunge into the material to a predetermined depth during the cut.

Are you talking about the plunge circular saw or the table saw?

Thanks!

Thanks!

Good idea and well done, I often need to make precise circles with my router. I just need to find a way to be able to adjust to the nearest millimeter.Perhaps with a second lexan Sheet which slides on the first and which would be fixed with a knurled screw...

Well seen ! Yes it is possible to use a reclaimed wood board to follow the decoration of the room!

Bonjour,il faut diminuer la valeur des delay().delay(5); et delay(15); pour le temps de variation d'une LED.delay(200); et delay(500); c'est le temps entre 2 LED.Donc essayer de diminuer ces valeurs et les LED s'allumerons plus vite.

Glad this is doing you a favor! Thank you for the compliments ;)

Thank you ! The structure does not move at all, even at 3 above, the posts are not fixed on the cinder block wall but there are struts (not sure of the translation) which prevent movements.

Thank you very much for the compliement and good achievement to you then!

Thank you for the compliments!

Merci beaucoup !Oui je suis français, d'ailleur la vidéo est en français ;)

Thanks!

Thank you!

Thank you for all this precious advice! It's really nice to have taken the time to explain all this to me, if I had known all this before, it would have avoided these mistakes!Thanks again !

It's funny since "etagere" is the French name too!

It's beautiful! Does the wood not warp over time?

Ok, thank you for this information, a beautiful creation that lasts over time!

Thank you!

How nice ;)

Maybe, but the whole thing would not be stable enough and would not support heavy loads!

Thanks ;)

Thank you for the compliments!

Correct, I forgot to specify it in this page. But be careful: the torch must not be used for too long otherwise it will damage the resin.

With pleasure!

Thank you and good idea for the center!

Thank you so much!The battery failed me so in the meantime I'm using a phone charger connected to the mains so I'm not sure.Yes it is true that there is a way to add interesting functions with an ESP8266!

I don't know what that looks like, sorry.

It is not turned on at night, I program it to turn on 1 hour before I wake up.

Thank you ! Yes I admit that I have not detailed the programming part, what information do you need?

Thank you very much for these compliments, it's nice ;)

Thank you ! Yes indeed, the resin is quite suitable for doing that too!

Thank you very much for these compliments!

Thanks!

Thank you that's nice ;)

Yes it is true that the readings are sometimes random, I think you have to take an average: for example take 5 readings in 5 minutes, and take the average distance.

Awesome ! Super happy to see that it pleases!

Le lien Youtube direct fonctionne :https://www.you tube.com/watch?v=P-Nu33QojrQ(copie le lien et colle you et tube)

Merci Lionel !

Good job ! Well done !And these cut tubes are a very good idea, they look good!Thanks for sharing!

Thank you ! Not bad the idea, I have never used an ES8266 but it is an idea that I keep ;)

Thanks

Sorry, it's a A photoresistor (LDR), translation problem

Thanks ;)

Sorry, it's a A photoresistor (LDR), translation problem!