Mr innovative

thanks

actually arduino never knows that servo complete it motion, but arduino command servo to complete its motion in given time delay, means there is time delay command after every servo moves this will ensure that servo will complete its motion with in that time...

thank you very much

off course I'll mention you credit and links I think it would missed by our team

thanks :)

thanks man !!

congratulationsss

it is fix, http://www.mediafire.com/file/qb57bnuww0us465/tachometer-using-arduino.ino

Mindboggling !!!!

yes its my honor to have advice from people like you who have a huge experience in your field, this will add more value to my work & KISS is best way to present your ideas, keep motivate us thanks

I'll try to make my explanation more efficient in upcoming projects thanks for your inputs

good one..very compact

yes

your gcode file is probabelly empty

yes it is possible you can get RPM reading directly on serial monitor , even if you can attache a Bluetooth module one can get RPM reading directly on mobile i will try this and post it soon

thanks

thank you very much to acknowledge our work.

link to download codehttp://www.mediafire.com/file/qb57bnuww0us465/tach...

thank

i applied, thanks

nice one

Its restore now you can access it

thanks bro

not sure beacuse i don't know about pcb printing methodthis machine can draw image on paper by pen/marker if this all need for PCB printing then yes

what is your operation system is it other than windows ?

if you dont remove this, motor shield directly gets for motor from arduino board so to avoid any damage to arduino board i used external 5v dc power so that i have to remote this pin,

you peoples are so nice, thanks for translate it JetMechanic this type of efforts are highly appreciable.

it looks you try to run GCTRL processing code in arduino.You have to run GCTRL.PDE in processing softwear

you nailed it !!

yes

reason is less number of turns of coil,

/* UPLOAD THIS CODE AND TRY*/#define ECHOPIN 6#define TRIGPIN 7void setup(){Serial.begin(9600);pinMode(ECHOPIN, INPUT);pinMode(TRIGPIN, OUTPUT);pinMode(11,OUTPUT);pinMode(10,OUTPUT);pinMode(9,OUTPUT);}void loop(){digitalWrite(TRIGPIN, LOW);delayMicroseconds(2);digitalWrite(TRIGPIN, HIGH);delayMicroseconds(10);digitalWrite(TRIGPIN, LOW);float distance = pulseIn(ECHOPIN, HIGH);distance = distance/58;Serial.print(distance);Serial.println(" cm");delay(50);if (distance >= 15) {digitalWrite(11, HIGH);digitalWrite(10, HIGH); digitalWrite(9, LOW);}else{digitalWrite(11, LOW); digitalWrite(10, HIGH);digitalWrite(9, HIGH);delay(2000);}}// code end

Having same problem

hi fs woodworking please see the video on below mention link

https://www.youtube.com/watch?v=hCPq4GJLixs

hi MNM_25-07 i have updated the complete wiring drawing above, also i am attaching a pic with this replay for your better understanding

hi MNM_25-07 i have updated the complete wiring drawing above, also i am attaching a pic with this replay for your better understanding

hi WannaDuino i have updated the complete wiring drawing above, also i am attaching a pic with this replay for your better understanding

your CNC is very impressive friend, but i don't understand a single word what you said :)

ranjith thanks to point out, I'll fix it