Tell us about yourself!
Multi-Purpose Gaming Table
Low Cost DIY CNC Router
DIY Drill Press Table and Fence
First Blow. Getting Into Blacksmithing With Empty Pockets
3D Catan. Designed, 3D Printed and Painted.
How to Make a Solar Powered Walkway
Small Parts Crosscut Sled + Miter Attachment
Miter Saw Station (plans Available)
Height-Adjustable Outfeed Worktable
Steel Viking Helmet
FRANKLIN LIBRARY CHAIR
I love your design! Your write up is excellent. How did you draw up the plans you have posted. I was thinking if doing a modification to add a pneumatic height adjustment. To do that I would probably have to shorten the legs by about 5 inches and that would throw off a number of the dimensions.
Modern Shop Stool From Two 2×4s
Easy Free-Standing Sun Shade
MY CROSS-CUT JIG AKA a SLED
Miter Saw Shadow Line
Tune Up Your Table Saw With a 2x4
Simple Rig for Spacing & Hanging Rebar in a Post Hole
Dungeons & Dragons in the Pool
Dungeons & Dragons in the PoolView Instructable »
Create Floor Plan Using MS Excel
I found my own textures. Learned a few thing doing that. I needed to print my texture in landscape and yes, it took a lot of ink. I cut it out with a razor which I recommend good light to do. I thought I could add some flaps and connect the "bastions" that did not quite work out. Have some other idea I might try. Mini paperclips or notched pop sticks. Be very careful with your glue and I used a glue stick to positive results. In all very fun
Pop-Up Dice Tower
Off the Grid Shed-cave
LED Tape - Under Cabinet Lighting - No soldering!