Tell us about yourself!
GLUE the hinges? How did that work out for you? Screws or even nails should hold better against the shear force applied to the hinges.
This looks like an incomplete project, None of the views show what I would call a complete working game (no plunger spring, no bottoms to the scoring pockets, no score markings, etc.).
I've seen problems with that style of 1/4" jacks in direct boxes. In time, plugging and unplugging will wear the contacts against the insulating barriers, creating a ledge. This ledge can make it harder to plug in all the way.
In video 2 what was the point of playing it if you kept the sound muted? And video 3 you only played one side.
That's a bit beyond my current tools and skillset. Trouble getting what I want out of the CADs I've tried so far (and I think Tinkercad may not be up to the task).
Are these tracks based on or compatible with Radio Shack's Mattracks F350? I have one which has broken rubber tracks.
I assume you meant the wainscoat added to insulation, not the weathering itself.
If you also add a DPST switch between the resistors and the terminals, you can switch back and forth between NiCd and Lithium.
Project videos unavailable.
You appear to be missing a lot of pictures in this.
Christmas Ornament HooksView Instructable »
One way to reduce the available gain on the volume control would be to add a resistor above it (to the bright switch on the schematic), use a 500k resistor and drop the pot to 500k or even 250k. Play with the values til you're happy.Has anyone tried this circuit with just 9v?
Does anyone make a breakout board like this for HD radio? I know of the SI4777 chip but I need a board I can solder to
I want to do this with Raspberry Pi but with one difference, I want HD radio reception. Is there a board that will do this? I know of the SI4777 but that's a SMD chip and I have no way to work with those, I need a breakout board like this.
I'm seeing nothing but a black box. Please post a proper Instructable with descriptive text and pictures.
Flying... #1, find a space much wider than your wingspan, not that narrow lane.
High Quality (and Safe) Nickel Plating
PVC -- It's Great for Inventions
Stop using Ferric Chloride etchant! (A better etching solution.)
How to set up multiple monitors in linux
NiCd - NiMH PC Based Smart Charger - Discharger