shubham_bhatt

Hello, how to write this in python. so that i can play sounds using raspberry pi gpio

I dont know why but for some reason i cant stop laughing. Good work they look cute ::)

done

Hi did you figure out how to give speed control.

Hi how to do speed control i tried to give pwm but still running at full speed here is the code.int IN1 = 12; int IN2 = 11; int IN3 = 10;int IN4 = 9;void setup(){ pinMode(IN1, OUTPUT); pinMode(IN2, OUTPUT); pinMode(IN3, OUTPUT); pinMode(IN4, OUTPUT); Serial.begin(9600);}void loop(){ Forward(); delay(5000); Reverse(); delay(5000); // Left(); // delay(5000); // Right(); // delay(5000);}void Forward(){ digitalWrite(IN1, 255); digitalWrite(IN2, 0); // Serial.print("Motor 1 Forward");// Serial.println(); digitalWrite(IN3, 0); digitalWrite(IN4, 255); // Serial.println("Motor 2 Forward");// Serial.println();}void Reverse(){ digitalWrite(IN1, 0); digitalWrite(IN2, 100); Serial.print("Motor 1002 Reverse");// Serial.println(); …

Hi how to do speed control i tried to give pwm but still running at full speed here is the code.int IN1 = 12; int IN2 = 11; int IN3 = 10;int IN4 = 9;void setup(){ pinMode(IN1, OUTPUT); pinMode(IN2, OUTPUT); pinMode(IN3, OUTPUT); pinMode(IN4, OUTPUT); Serial.begin(9600);}void loop(){ Forward(); delay(5000); Reverse(); delay(5000); // Left(); // delay(5000); // Right(); // delay(5000);}void Forward(){ digitalWrite(IN1, 255); digitalWrite(IN2, 0); // Serial.print("Motor 1 Forward");// Serial.println(); digitalWrite(IN3, 0); digitalWrite(IN4, 255); // Serial.println("Motor 2 Forward");// Serial.println();}void Reverse(){ digitalWrite(IN1, 0); digitalWrite(IN2, 100); Serial.print("Motor 1002 Reverse");// Serial.println(); digitalWrite(IN3, 100); digitalWrite(IN4, 0);// Serial.println("Motor 2 Reverse");// Serial.println();}

Hello how to do speed contol plese help

Wow that's great i would really like to see the rover working please feel to dm me on Instagram would really like to see the pics and videos. https://www.instagram.com/invites/contact/?i=6gprjss87ii4&utm_content=m26aq2

Hi please contact me on Instagram I'm on Instagram as @94.others. Install the app to follow my photos and videos. https://www.instagram.com/invites/contact/?i=6gprjss87ii4&utm_content=m26aq2

Well not quite i am trying to make a smaller version of this maybe few more months

Soory i just saw these comments. Appreciate gmail.com had been moving these to spam.

hi i have a problem when i am trying to install the live stream its giving me error. i am using raspi camera moudule generic one and raspi 3. I am new to this dont know how to use please help

using ssh google raspberry pi login with putty.

I think its this one https://www.thingiverse.com/thing:1875930Do share the project video with me once it finished. I would really like to see it.

It says multiple libraries for uno maybe delete library then install it again.contact me here https://www.instagram.com/94.others/

yes we can but i wmated to ake it simple for others raspberrypi is little bit tricky.

hi i am also trying to make this but it is not working. are u using dc dc converter. How much voltage are u using

well for 3d printing i used 1 kg approx filament. Rest motor are cheap and u dont have to buy every component depending upon your budget .

Yeah sure i will help you

7.5v lipo battery. Well dont have raspi zero. My goal was to make this rover as close to the real one as possible so thats why i added two cameras. As for solar panel it was suppose to charge another battery which was going to power led. I removed that part because video was getting too long and i didn't realise my webcam already had led so no point. For solar panel i took apart one of those automatic solar panel lights.

Yes i can tell me whatvisbthe problem

This is one of the hidden gems an actual radar that works.

wow that never crossed my mind thanks. well we did not see any algae growth as it is new and right after it was built we used it for few days in that period water was moving and then we drained it. if you have anything in mind please do suggest me.

thanks

Hi iwant to make a small working boat model with thin sheet metal can i glue it with araldite or is there any way to make joint watertight without welding or rivets

Technically it is not a virus u can not send it u have to get their phone and change the settings yourself but tje result is very fun