Introduction: Shower Puff Fix.

About: I'm a hack, not an expert on any one subject.

How to fix a $1.00 Shower Puff/ Buddy.
I hate buying something only to have it fall apart in a couple of months. This shower puff is something that could have lasted longer but they (the manufacturer) used a cheap string to hold it together.

Step 1: Things You Need.

One broken shower puff.
One zip tie about 4 to 6 inches long.

Step 2: Getting Started

Stretch out the shower puff and with one hand, start scrunching up one end of the shower puff. Keep scrunching it up in the middle till you have it all in one hand.

Step 3: Finishing Up

Keeping one hand full of the scrunched up shower puffy,use your other hand and add to the pile of puffy the loop of rope. Take your fingers and with the zip tie encircle the center of the shower puffy, making sure that you have the looped rope included. Tighten the zip tie once you have everything together. You'll have to tighten the real tight. Cut the tail off of the zip tie as close to the locking head. I used wire cutters first then a razor so that there is no sharp edges on it. Hopefully you are now done.