Introduction: Sword
basically a big shiny blade.
here's the pieces you need:
connectors:
2 black/white connectors
4 purple/dark gray clip connectors
6 green connectors
56 blue clip connectors
1 red/dark gray connector
34 yellow/gold/gray connectors
rods:
48 green/black small rods
81 white/black/silver rods
32 blue rods
optional:
if you want, you can add an optional "hook" on the end of the handle(shown in pic).
pcs:
2 green/black rods,
and 2 gray connectors(end pieces)
Step 1: Build the Blade
basic pieces of the blade
be sure to pay attention to the notes and look at the pictures in order
notice the position of all the blue connectors. for a cleaner look, they should be placed as shown.
Step 2: Put Together the Blade
once again, pay attention to the position of the blue clips
Step 3: Buidling the Bottom of the Blade
once again, pay attention to the position of the blue clips
Step 4: The Handle.
the handle is built
Step 5: Build the Handle
build these pieces
Step 6: Handle Cont.
Step 7: Decorative and Strenght
pretty easy
Step 8: Last Step-combination
here, the blade and the handle will be connected