Brandon Thompson's Robot

All you will need for this is the cut out, tape and a pair of scissors///.

Step 1: Step 1

Cut out the two identical rectangles. Roll them up like a straw, long ways and tape them closed. These will be the feet/legs.

Step 2: Step 2

Cut the larger rectangle out, and fold it along the dotted line. Tape the square closed.

Step 3: Step 3

Cut out the long skinny bar (arms) and tape it directly below the robot’s face

Step 4: Step 4

Place the large head that was made perpendicular to the rolled straws, and taped them to the head. One on each side.

Step 5: Step 5

All done, you have a new buddy!