Introduction: Ghost 3.0
Check out my SSCB-11!
Hopefully the final ghost! Haha, well, there are some major and minor differences between this and the ghost 2.0. This gun has a better stock, a pin guide, a more comfortable place to put your hand, and a place to put another magazine in the stock! I'm not going to list the minors, but I have to say, this gun is great. It gets better range because of the pin guide, so it can be a good fun gun, and a war gun because of its reliability, and extra magazine storage. So, yeah. This is a good gun, and I recommend anyone to build this. (unless it's your first gun, don't build this!)
fun to use
(What more could you ask for in a gun?)
Well, get building!
Step 1: Stock
This is the stock!
Step 2: Front Body
Look at the pics! Probably the hardest step...
Step 3: Break!
Have some festive christmas cookies!
Step 4: Top Body
This is the rest of the body and assembly.
Step 5: Magazine
The part that feeds the bullets into the gun.
Note: (important) You must put the side with the blue rod on the magazine towards the front of the gun when inserting it into the gun.
Step 6: Loading the Magazine
Loading isn't hard at all. Just follow the pictures! This step shows how to use the magazine storage also. (sorry that some are blurry)
Step 7: Firing Pin, Bands, and Firing
All of the rest.
1 Person Made This Project!
- MonkeyKnexer15 made it!