Introduction: HOW TO MAKE CHOCOLATE VENDING MACHINE
Hello my friends!
Today we make chocolate vending machine from cardboard. You can take chocolates: Mars, Snickers or Kit Kat for 2 Euro.
For making this machine you need:
- Cardboard
- Hot glue
- Knife
- Case for disk
- Stickers
- 2 Euro Coin
- Snickers chocolate
- Mars chocolate
- Kit Kat chocolate
First, watch the video instruction
Looked?
Let's start!
Step 1: Place for Chocolates
First you need to take the cardboard.
Cut in the right places as in the picture
Then they need to be glued together
Step 2: Pusher for Chocolates
It is necessary to cut a pusher for chocolates.
This device will push the chocolate to us.
Step 3: Platform for the Device
You need to trim and prepare a pusher platform.
All dimensions are shown in the picture.
Step 4: Сonnect Platform and Collector
Now we connect the platform and the collector for the chocolates.
Step 5: Cut Out the Hole for the Coins and Install the Pusher
You need to cut out the hole for the coins as indicated in the image
Also fix the pusher to the platform.
Step 6: Install the Coin Trap
To do this, cut the trap and collector.
It is important that the holes of the collector coincide with the first hole in the platform
Step 7: Extrusion Device
In this cardboard there must be a hole for the coin, where the coin comes.
Without a coin, it will slide.
Step 8: Box for the Device.
For full operation, you need three devices.
We fix everything and fix it. My coins roll out. But you can make a collector for coins.
Step 9: Decoration and the End of Work.
You can decorate or highlight the device.
Once again, look at the video with the instructions and everything will be clear.
This is the first instruction on the site. I hope you liked it !!! Put your likes and comment on YouTube. We will do more instructions.
1 Person Made This Project!
- Felixtheappropriate made it!
24 Comments
5 years ago
So nothing will be on the pull-out thing if you don't put in a coin and pull it out? Or will it just not pull out?
Reply 5 years ago
I think that with a coin it will be more interesting.
I start to do this machine with my husband! It's really funny :)
Reply 1 year ago
Can anyone here do proper grammar?
Reply 1 year ago
English is not the first language for everyone
Reply 5 years ago
Dear Szokusia,
Without a coin, it is impossible to move the pusher for the chocolates.
Watch the video how it works.
If you liked it, put Like on Youtube, and write a comment.
Just do not forget to subscribe and you will not miss the most interesting!
Thank you)
Reply 1 year ago
Can you English good?
5 years ago
Wanna dat machine at home :p
Reply 5 years ago
what is a dat
Reply 1 year ago
Dat means that. Alex wants the machine at home.
1 year ago
I need help with this sd
Question 2 years ago
Beside materials, are any tools needed?
Question 4 years ago on Step 1
What are the measurements for the card board
Question 4 years ago on Step 1
how do I glue because I can barely see the other side
5 years ago
It's ok
5 years ago
What I LOVE about this instructable is that it's NOT laser cut or done with anything fancy! Just plain good measuring, cutting (although I cringed on seeing the wooden surface and the box cutter), and hot glue. Bravo! Well done, and documented.
5 years ago
quick question. Can you make more detailed instructions because this one is kind of hard to understand and it doesn't show us how to make all the parts.
5 years ago
Also, will it work with non-2 euro coins, like quarters or tokens?
Reply 5 years ago
Dear Szokusia, It will work with other coin
5 years ago
That's so cute!!!!! I have to make it with my husband for our children!!! My son
Joshua has been practicing wiping down the kitchen table properly for
months now, and he is just now starting to do a really good job. And this chocolate machine wiil be the best gift for his diligence!!! Thanks a lot for a good idea!
Reply 5 years ago
That sounds adroable! I'm sure he'll love it