YG-Scanner Budget 3D Scanner:Holographic 3D Maker

Introduction: YG-Scanner Budget 3D Scanner:Holographic 3D Maker

About: 3D Scanning/Holographic 3D

We have established projects of affordable 3D Scanner

https://www.instructables.com/id/199USD-3D-Scanner...

and DIY Big Holographic 3D Projecter by Respberry Pi

https://www.instructables.com/id/Big-Holographic-P...

This time, we introduce you how to make Holographic videos from 3D Scanner

Step 1: Connet YG-Scanner to PC

Connect YScanner to PC.with USB Cable.

Step 2: 3D Scanning

Open YG-Scanner UI, click "Start" button to start scanning, waiting for the finishing of Scanning

Step 3: Holographic Video Creating

Click"Holographic "button to start video making , waiting...

Step 4: Holograhic Projecting by Respberry Pi

download the video to your device,in our case, we download the video in Respberry Pi 4 and play it with the projecter.

Step 5: Normal Video Creating

Click"Normal "button to start video making , waiting...

Step 6: Anaglyph 3D Video Creating

Click"Anaglyph "button to start video making , waiting...

Step 7: VR Video Creating

Click"VR "button to start video making , waiting...

if you want to get more information,please leave your comments,or you can find it here:

https://www.tindie.com/products/Makerfabs/yscanner-3d-scanner/

Step 8: Saving As Point Cloud File

As a 3D Scanner, Certainly, you can save the scanned data as Point Cloud file, the resolution can reach to as low as 0.2mm. You can check it in the attached file.

Be the First to Share

    Recommendations

    • Plywood Challenge

      Plywood Challenge
    • Plastic Contest

      Plastic Contest
    • Battery Powered Contest

      Battery Powered Contest

    Discussions