Leather Bag

You can have this acrylic pattern from here:

http://www.leathercraftpattern.com/Acrylic-templat...

Advice:

Leather: We advice 2.0mm (5oz) leather for surface, and 1.0mm (2.5oz) leather for lining, it needs about 25cm x 38cm leather for surface and 30cm x 90cm leather for lining.

Hardwares: We offer hardware kits.

Tools: If you are a new leather player, try to considerate to have tool kit here:

http://www.leathercraftpattern.com/leather-tools-l...

Step 1: Cut All Pieces by Acrylic Pattern.

Step 2: Paint Edge Oil on the Edges

Step 3: Sew First Card Slot On, Only Sew the Bottom Stitching Line

Step 4: Sew Other Card Slots On

Step 5: Make Zipper of Inner Pocket

Step 6: Make Zipper of Inner Pocket - Cut Off Redundant Elements, Install Bottom Stop and Slider, Install Top Stops.

Step 7: It Needs 2 Pieces of Zippers, Glue Them on the Zipper Hole and Sew Around

Step 8: Install Magnetic Button, Here I Add a Piece of Thick Paper to Strengthen the Soft Leather

Step 9: Hollow the Hole for Inlay Leather

Step 10: Thin the Edge of Inlay Leather and Sew It On.

Step 11: Now We Begin to Sew Gussets On.

Step 12: Finally Install Taps and Hardware On, the Bag Is Finished.