3D Origami Pieces

In this project you'll see how to make 3D Origami Pieces.

Step 1: Watch the Video!!!

Step 2: How to Make an Origami Piece

Take a piece of paper ( 6 cm x 9 cm ).

In the next Steps I will show you how to fold it!

Step 3: First Fold

First fold

Step 4: Second Fold

Second fold

Step 5: Unfold Only the Last Folding

Unfold only the last folding and rotate the paper like in the second image with the fold in upside.

If you don't understand the photos watch the video!

Step 6: Third Fold

Third fold

Step 7: Fourth Fold

Fourth fold

Step 8: Rotate the Paper

Rotate the paper like in the photos

If you don't understand the photos watch the video!

Step 9: Fifth Fold and Sixth Fold

Fifth fold and Sixth fold

Step 10: Seventh Fold and Eighth Fold

Seventh fold and Eighth fold

Step 11: Last Fold

Last fold

The piece will look like the one in the last photo

Step 12: More Project Videos

Well now you know how to make 3D Origami Pieces.

If you liked this project, perhaps you'll like some of my others.

Check them out at:

https://www.instructables.com/member/Giulia+Art

Comments

[leanne87]

Do the pieces of paper have to be those dimensions? The reason I'm asking is because I've got a box of origami paper but it's in squares so when I fold it & cut out the smaller pieces obviously they're not going to be the same size as they are when you do the same with A4 size paper & also I don't have a ruler - I'm downloading a ruler app as we speak lol but I dunno exactly how big mine are bt I do know that wen I've folded them & turned them over to do the little triangular folds well my bits below the line if u get wot I mean? Well they're a lot longer than yours - I was tempted to jst cut the excess off thinking I cud just carry on making them & then wen I get 2 tht point chop them off but it's a lot of waste so any advice or help will be greatly appreciated & also any criticism welcomed Thank you very much 👍

[cutegirl1212]

how do I put them together?

[Musiclover863]

You insert the two points into the slots of your piece

[davinaL]

Hey guys I'm a web student and for a class project I was told to make a website of any of my choosing and I chose to make a website about 3D origami. It would be amazing if some of you can visit my website, http://sweb1.dmit.nait.ca/~dliew4/dmit1528/beginner-3D-origami/ and give me any feedback on what I'm doing right or what I can do better. The images you see on there that are related to origami were made by me featuring the YouTube videos that I have watched.

[Tactical man220]

thanks super helpful

[tverduin]

What are the dimensions of the paper used to construct an average 3D origami model?

[thunder_ir]

caio

thank you for learning

I made it

[Giulia Art]

You are welcome my friend:)