Introduction: How to Make a PVC C and PVC D
This is how you make this
Step 1: Gather Materials for PVC C
1. 4 45 degree PVC Pieces
2. 5 3 inch PVC pieces
2. 5 3 inch PVC pieces
Step 2: Assemble the C
Attach the 3 inch PVC pipe to the elbow pieces then move the pipes and elbows into the corresponding spot in the shape of a C
Step 3: Finished C Product
Then you have a C!
Step 4: Gather Materials for PVC D
1.1 13 inch PVC pipe
2. 5 5inch PVC pipes
3. 2 90 degree PVC elbow pieces
4. 4 45 degree PVC pipes
2. 5 5inch PVC pipes
3. 2 90 degree PVC elbow pieces
4. 4 45 degree PVC pipes
Step 5: Assemble the D
Attach the 90 degree pieces to both ends of the 13 inch PVC pipe, then place the 5 inch pipe on the other elbow slot and proceed to attach the opposite end to the 45 degree elbow piece. Keep doing this till the D is complete.
Step 6: Finished D Product
Then you have a D