Introduction: K'nex M4A1

####(For Version 2, Click 7th step.)####This is kinda like Fartonia's M4A1 This gun doesn't shoot but other than that it has a removable clip, reloading pully thing and an iron sight :D! Check it out, if you have any questions let me know :D!

Step 1: Removable/Detachable Clip

Pretty simple, notice the fact that you gotta bend some stuff to make it look "realistic"

Step 2: Tip/Handle/Barrel

Kinda complicated for the tip area, but if you have any questions, just let me know

Step 3: Stock/Butt

Step 4: Trigger/Handle/Mag Holder

Kinda tricky here too but you'll get it, i know you will :D!

Step 5: Body

any questions? comment or send me a msg :D!

Step 6: Attachments

Easy peasy Lemon Squeezy XD lol sounds wrong

Step 7: Lowering the Pulling Thing (V2)

Okay you need to read very carefuly. You see how on the pull back mechanism, there are 2 connectors. Grey or purple. one is up and the other 1 upside down. Replace the Grey/purple connector with a Orange Connector. the one that looks like a ladder? i call it the ladder connector. So The connector with 1 hold and 1 conector spot. replace it with a Ladder connector. When you are done Just attach the Mechanism on the bottom of the ladder.