Introduction: Knex Machine Hand Gun
My first instructable. I'm proud of this creation and hope you guys will like it too!
Many more instructables to come!
Part List:
64 Grey connectors
8 Purple/ grey connectors
28 Yellow connectors
8 Snow flakes
15 Red connectors
2 Brown connectors
5 Green connectors
9 Black ball connectors
16 Yellow rods
15 Blue rods
41 White rods
32 Green rods
1 Long flexible rod (optional)
2 Grey rods
6 Grey spacers
3 Blue spacers
1 motor
1 Medium wheel
1 Small wheel
Many more instructables to come!
Part List:
64 Grey connectors
8 Purple/ grey connectors
28 Yellow connectors
8 Snow flakes
15 Red connectors
2 Brown connectors
5 Green connectors
9 Black ball connectors
16 Yellow rods
15 Blue rods
41 White rods
32 Green rods
1 Long flexible rod (optional)
2 Grey rods
6 Grey spacers
3 Blue spacers
1 motor
1 Medium wheel
1 Small wheel
Step 1: The Barrels
Here you will make the barrels for the machine gun.
Step 2: The Skeleton
This is where you hold it and where the drivetrain thing goes, (what else do I call it?)
Step 3: The Drivetrain Thingy
the motor attaches to this and makes the barrels spin!
Step 4: Put It Together!
Put it all together and you are almost done!
Step 5: Loading
To load it is just like a block trigger, only don't push the blocker too far. Look at the first picture, there is a little bit of the yellow rod showing, you have to have it like that or it won't work. Now load it with white or green rods and go shoot something!