Introduction: Knex Tip Over Target
This is a target that I made to shoot at. It tips over when you hit it.
The second pic is of all of the pieces you will need.
I would like comments because this is my first instructable.
Step 1: Base
Pic 1. Here are the pieces you will need for this step
Pic 2. Put it together like this
Pic 3. Then add this
Step 2: Top Connectors
I don't know what to call them, but they connect the bottom to the top.
Pic 1. The pieces you will need for this step
Snap the orange pieces on the white pieces in between the yellows, as in pic 2.
Pic 2. Put it together like this
Step 3: Top
Pic 1. The pieces you will need for this step
Pic 2. Put it together like this
Step 4: Final Touches
Here is how you put it all together
Pic 1. Pieces you need for this step
Put the top on top of the top connectors, and snap it into place. This might take a little while. It took me ten minutes to get this last part snapped in, and I had the knex marks on my fingers for a few days!
Finished product should look like pic 2.
And there you have it! Don't forget to leave comments.
12 Comments
12 years ago on Introduction
I would rather just use a knex piece.
14 years ago on Introduction
it is a good magazine if you add y clips to it
Reply 13 years ago on Introduction
Exactly what I was thinking!
Reply 13 years ago on Introduction
yah.
14 years ago on Introduction
2.5*S 1. not he best 2THere has been better 3. best 4 sniping
14 years ago on Introduction
There are better targets. but this should be good for sniper targets. 2.5*
14 years ago on Introduction
Adequate.
Reply 14 years ago on Introduction
LOL
Reply 14 years ago on Introduction
hahaha lol
Reply 14 years ago on Introduction
I just don't want all the other people going "what's the point in even posting " on EVERY SINGLE THING!
Reply 14 years ago on Introduction
i know but.
14 years ago on Introduction
Nice pictures, but the target is alittle simple, sorry.