Introduction: Lancer Assault Rife

About: I like stuff
This is my second instructable on this site.
I was looking for a good lancer on this site however All I could find were slideshows.
I made my own and I daresay it does look okay.
The rest will be posted when I take this apart.
Posted on Christmas Day!!


The Dunkis . Trugger
The Jamalam: Magazine


Shoots a good 40 feet
The chainsaw works but isnt good with the slow blue motor that Im using.
Magazine holds about 20 blue rods
Looks cool!

You could add red connecters to the chain but I was too lazy to do so.

1.My lancer
2.The one I modeled it after,  yes it has a straight mag, but I build the Jamalams gun, and the only part I liked about it was the mag and reciever.
3 - a blurry version of the first
4. Mag
6. Trigger
7.Front portion

Step 1: The Handle + Trigger

well enough with the crap,
heres the basic gun in picture one,

other than that

1. The basic gun
2 - 4, are all different views of the handle, I was too lazy to take it apart,
5 - 7 trigger, (the dunkis)

Step 2: The Magazine + Magpush

Mag credits goes to the Jamalams TTK whatever, its a curved on

1-4 mag
5. mag + magpush

Step 3: Front Barrel, + Motor

You will now build the front portion of the gun
You will also attach the motor, if you have one, If you dont have mine, maybe you can mod the front for your motor
the motor is the front handle, i guess, because there are no other places to put your hands

1. you will make this
2. make this
3 and this,
4. and this
5. put the motor in between the parts you just made
6.put the yellow rod in there
7. then attach the other parts, with a yellow rod
8.make this
10. attach a small wheel.
11. attach a medium wheel.

Step 4: The Lancers Tail

1. You will build this
2 build this
3. build this
4. just a display
5. attach
6. make
7. attach here
8. finish

Step 5: The Body

This is the part where everything attaches.
Please bear with me and read my notes

1. what you will make
2-6 make
7-9 attach
10 make
11-14 attaching the mag
15 Oops read the notes while you are attaching
16 attach blue rods
17-19 attach
20. attach the pic4 here
21. another view
22-23 another view of pic4 attachment
24. looks cool!!

Step 6: The Chainsaw

This is probably the most distinctive part of the lancer

1. 34 total
2. all composed of these

Step 7: Put It All Together Step


1 take this
2. and attach the handle
3. Then attach it to the body
4. The trigger goes here
5 and behind the blue connecters
6. get ready
7. orange connecters attach here
8. snap
9 the blue connecter attachs as a sixth layer
10/ attach the chainsaw

Step 8: Firing

1. THe firing pin
2. It goes in here, through
3. like this
4. bottom load blue rods
5-6 and do this
7. trigger rubber band