Leather Long Wallet Billfold

You can have this acrylic pattern from here:

http://www.leathercraftpattern.com/Acrylic-template/acrylic-long-wallet-template-A-61

The finished size is: 7.9" x 3.9" x 1.2" (20cm x 10cm x 3cm).

Advice:

Leather: We advice 2.0mm (5oz) leather, size 30cm x 20cm. 1.0mm (2.5oz) leather, size 30cm x 80cm.

Hardware: 201snap x4.

Tools: If you are a new leather player, try to considerate to have tool kit here: http://www.leathercraftpattern.com/leather-tools-leathercraft-tools/leather-tool-kit/leathercraft-tools-leather-craft-patterns-leather-art-leather-carving-tool

Step 1: Cut All Leather Pieces Use Acrylic Pattern.

Step 2: Punch Stitching Lines Use Acrylic Pattern Too.

Step 3: Sew First Card Slot on Card Slot Back Leather, Only Sew the Bottom Stitching Line.

Step 4: Sew Second Card Slot on Card Slot Back Leather, Only Sew the Bottom Stitching Line Too.

Step 5: Sew the Third Card Slot on Card Slot Back Leather, Only Sew the Middle Stitching Line, After Sewing, the First, Second and Third Card Slots Will Be Sewn With Card Slot Back Leather All.

Step 6: Sew Bill Slot on Lining. Only Sew the "]" Shape Stitching Line.

Step 7: Sew Card Slot Back Leather With Bill Slot Leather.

Step 8: Sew Pouch Back Leather On, Only Sew "[" Shape Stitching Line.

Step 9: Install 201 Snap (socket and Cap) on Flap Strengthen Leather, and Then Sew It on Flap.

Step 10: Install 201 Snap(stud and Eyelet) on Pouch Front Leather and Then Sew It With Pouch Back Leather.

Step 11: Install 2 201 Snaps (socket and Cap) on Attachment Pouch Lining.

Step 12: Install 2 Snaps (stud and Eyelet) on Surface.

Step 13: Install 201 Snap (stud and Eyelet) on Attachment Pouch Surface Leather. Install Concho Button With Socket on Strap.

Step 14: The Long Wallet Is Finished.