Leather Wallet

Introduction: Leather Wallet

About: We are a professional leather pattern design and tool development studio, we offer high quality pdf, acrylic patterns, and high quality leather tools. We have 2 online stores: www.leathercraftpattern.com www.l…

You can have this acrylic pattern from here:


The finished size is: 7.7" x 3.5" x 0.8" (19.5cm x 9cm x 2cm).


Leather: 2.0mm (5oz) leather for surface, size 20cm x 20cm. 1.0mm (2.5oz) leather for lining, size 20cm x 51cm.

Hardware: 201 snap x2.

Tools: If you are a new leather player, try to considerate to have tool kit here: http://www.leathercraftpattern.com/leather-tools-leathercraft-tools/leather-tool-kit/leathercraft-tools-leather-craft-patterns-leather-art-leather-carving-tool

Step 1: Cut All Leather Pieces Use Acrylic and Punch Stitching Holes Use 4mm Chisel.

Step 2: Sew the First Card Slot on Lining, Only Sew the Bottom Stitching Line.

Step 3: Sew the Second Card Slot on Lining, Only Sew the Bottom Stitching Line.

Step 4: Take 201 Snap Cap Cover Down to Have a Flap Cap.

Step 5: Install Socket and Cap on the Third Card Slot, Also Install Stud and Eyelet on the Other Third Slot.

Step 6: Sew Middle Stitching Line of 3 Card Slots With Lining.

Step 7: Do the Same Steps Above on the Other Side of the Lining.

Step 8: Sew Lining With Surface Along the Stitching Line.

Step 9: The Wallet Is Finished.

Be the First to Share


    • Lamps Challenge

      Lamps Challenge
    • CNC and 3D Printing Contest

      CNC and 3D Printing Contest
    • Rice & Grains Challenge

      Rice & Grains Challenge