Side Table

16,712

38

11

Introduction: Side Table

small side table very easy to make

Step 1: Materials

two 8 x 23 x 3/4 inch wood. Pine in this case.

two 8 x 8 x 3/4 inch base and top.

wood glue, Small nails, saw,sanding paper,drill,drill bits, router,

Step 2:

Cut the wood 7 inches to 1 inch as seem in picture. do the same to both pieces.

take one piece and stand it up rite. so the one inch side is on the top.

get the other piece and flip it so the mall side 1 inch is on the botom. Glue this two pieces together

and repeat .....

Step 3:

you will end up with two pices looking the same. get the 8 x 8 piece of wood and glue the vertical pieces to it .

get the other 8x8 piece and glue it to the top.

Round the edges of all if you like.

Step 4:

sand it and stained it and you are done.

1 Person Made This Project!

Recommendations

  • First Time Author Contest

    First Time Author Contest
  • Eggs Challenge

    Eggs Challenge
  • Remote Control Contest

    Remote Control Contest

11 Comments

0
evachar60
evachar60

2 years ago on Step 4

Can I make this taller?

0
stevenarango
stevenarango

Reply 2 years ago

Yes of course but in that case the base and top need to be bigger

0
evachar60
evachar60

Reply 2 years ago

What a great table you made. Thanks so much

To be honest, the digital drawing had me thinking at first that the end result was going to look more computerised. Perhaps the material choice eventually made the final product a little too simple for a complicated design.

0
markgrogan
markgrogan

3 years ago on Introduction

What a unique looking table! I am constantly being surprised with the amazing work that I see on this site. Some of this stuff really should be submitted for design competitions and this is one of them!

0
stevenarango
stevenarango

Reply 3 years ago

thank you for your kind comment. i like making all kinds of things.....

0
UdyRegan
UdyRegan

3 years ago on Introduction

I love how you've rendered everything first before doing it up! I would have just used pen and paper to get a gist!

Wow, that looks like an almost impossible design. To have it physically made into a tangible piece of furniture makes it even more interesting. I would spray coat it with a metallic finish to make it look even more futuristic.

0
stevenarango
stevenarango

Reply 3 years ago

i'm glad you liked my table... ty

0
Alex in NZ
Alex in NZ

3 years ago

Really nice little side table. Thank you for sharing the idea and the making :-)

0
stevenarango
stevenarango

Reply 3 years ago

thank you... i needed a place to keep my drink while watching TV