Introduction: Simple Lego Table and Chair
A simple Lego table and chair made as an English class project.
Step 1:
Locate 3- 2x8 blocks and place them pins down with their long edges touching. Then Locate 2 - 2x6 blocks.
Step 2:
Place 1 - 2x6 block flush along each short edge of the now 6x8 rectangle. Locate 12 - 2x2 blocks and make 4 vertical stacks 3 blocks tall. Place 1 stack of blocks in each corner of the assembly.
Step 3:
Locate 2 - 2x4 blocks and 4 - 1x2 blocks. (The 4 - 1x2 blocks could be replaced with a 3rd 2x4 block). Place the 2 - 2x4 blocks pins down with their long edges touching. Place the 4 - 1x2 blocks along the center line to connect the 2 - 2x4 blocks.
Step 4:
Locate 8 - 1x1 blocks. Make 4 stacks of blocks 2 blocks high. Place a stack at each outside corner of the 2x4 blocks.
Step 5:
Flip the chair assembly over. Locate 3 - 1x4 blocks and stack all 3 on top of each other. Place this stack of blocks along any edge of the chair assembly.
Step 6:
Finally a completed Lego table and chair for every miniature housing need.