Introduction: Skateboard Coat Rack
Step 1: Disassembley
you can see in the 1st picture where the truck was broken. So to start of i disassembled the skateboard. everything was taken apart with a screwdriver and ratchet.
Step 2: Cut and Screw
I cut the board with the tablesaw and screwed the back together side by side.
Step 3: Attaching the Wheels
I drilled some holes in the board and also used a forstner bit so that the head of the bolt would be recessed.
I attached the wheels using some bolts. the wheels will act as a hook to hang the bags and coats.
Step 4: The Finish
I attached the new skateboard coat rack on to wardrobe door by using some long screws from the back of the door. and that is it finished. I made this a while ago for my kids bedroom. It lasted well but i would like to have another go at it. i think i could do a better job now that i have gained some experience. This was also my 1st video I uploaded to youTube I hope that my videos have improved since this one but would love to know what you think.
you can follow me
etsy shop: www.facebook.com/Johnmadeitcom
Participated in the